Featured Product

E8-X

10MHz (5MHz to 100 MHz)

The Quartzlock E8-X GPS Disciplined OCXO represents a breakthrough in exceptionally low cost, traceable, calibration-free frequency and time standards. These very low cost references maintain the high frequency and time accuracy required for demanding applications. Also in the same family there are 1U 19" rack mount GPS disciplined instruments, the E8000 and E8010, with many options which can be customised to meet your requirement. Quartzlock's hydrogen maser based laboratory is used in production test and quality assurance to ensure compliance with offset and stability specifications.

• Output Frequency: 10 MHz (up to 100 MHz)
• Output Level: +10 dBm into 50 Ohms
• 1 PPS Output: 1

Featured Product

A7000

The A7000 frequency/phase analyzer is an improved version of the previous model A7 for measuring a wide range of frequency standards, Oscillators, isolation amplifiers, frequency multipliers, dividers and passive devices such as cables. The instrument is self-contained with an internal phase meter and needs no external counter. A PC running Windows operating systems with one USB port provides a simple user interface with immediate calculation and graphing of Allan variance. Tau (gate time) values from 100us to 100 seconds may be used. The measurement data can be stored via USB interface which prevents Windows from losing data. The phase has a 128k buffer which provides complete protection to the data if the computer fails during a measurement run. The internal 128k volatile sample memory can be upgraded to 512k nonvolatile 512k memory to store a larger amount of measurement data. The stored data may be stored to disk for analysis with an external program such as Stable 32. No calibration required to measure two different frequency using A7000 software.

Featured Product

E5-6P

The E5-6P Distribution Amplifier is a 1U rack mount unit. It allows a cost and space efficient way to distribute reference frequencies throughout a system or laboratory with virtually no signal degradation. The standard E5-6P accepts single or multiple inputs and provides single or multiple outputs, at input frequencies from DC to 100 MHz.

Featured Product

A6-1PPS

10 MHz

The A6-1PPS uses a three-state Kalman filter algorithm to measure and correct the frequency offset of the oscillator with respect to the 1pps input. 1PPS Timing Module technical Article gives a technical overview of the Quartzlock 1 Pulse Per Second Timing module.

• Output Frequency: 10 MHz
• Output Level: +13 dBm +/-2 dBm into 50 Ohms
• 1 PPS Output: 1